Are you thinking of upgrading the aesthetics of your place? Roller blinds are a great choice for windows because of their stylish look and high functionality. For a proper fit, precise measuring of the windows is essential. As it is a one time investment, you must pay due attention to installation and assembly. With even a small mistake in measurement, you might end up with ill-fitting blinds that don’t look good.
In this guide, you can get to know how to measure roller blinds.
The Basics of Measuring for Roller Blinds
It’s critical to consider the two primary roller blind fitting options before taking the measurements.
Inside Mount Roller Blinds
By installing the blind inside the window sill, you can maximise natural light and create a cleaner look. It’s even better to keep the architectural elements of the window. For this purpose, you must pay more attention to the visual appeal. The blinds should be according to the aesthetics of your space.
Outside Mount Roller Blinds
To cover a broader area, the blind is mounted outside the window. This works well for windows with asymmetrical shapes. Also, if you want to add some decoration or block more light, an outside mount is better. These blinds should be made up of tough and resilient material to withstand the climatic changes. It should be able to stay strong in strong winds, rain and sunlight.
Required Equipment and Supplies
You can measure the space accurately for roller blinds using the following tools:
- A measuring tape
- Paper and a pencil to note the measurements
- Level ladder
Measurements for Inside Mount Blinds
Width Measurement
Width at the Top
From side to side, measure the width of the window recess at the top. To ensure the blind will fit, make sure you measure at the narrowest point.
Width at the Bottom
Don’t forget to measure the bottom of the recess width. The top and bottom widths should ideally be comparable, although small differences are acceptable. Use the smallest width measurement obtained to make sure the roller blind fits the recess easily.
Height Measurement
Measure the Height on the Left Side
On the left side, measure the height of the recess between the top of the window frame and the window sill.
Measure the Height on the Right Side
Because the recess may not be quite square, measure the height on the right side.
Note the Maximum Height Measurement
Use the longest height measurement to make sure the blind covers the entire window.
Measure The Depth of the Recess
From the front edge to the back, measure the recess depth of the window. This is necessary to guarantee that the roller blind will slide into the recess without getting in the way.
Measurements for Outside Mounted Roller Blinds
Width Measurement
If you want the blind to cover the whole window, measure the width of the window. Don’t forget to consider the trim or frame. To increase privacy and block off additional light, add extra width (usually 2-4 inches) on each side for a better coverage.
Measure the Height of the Window
Take a measurement starting from the top, which is often above the window frame. It should end at the bottom, which is where you want the blind to fall.
Note An Increased Height
Increase the measurement above and below the window frame by a few inches for more privacy and light coverage.
Find the Projection Depth
Decide the distance that you like the blind to extend from the wall. This guarantees that the blind gets past any objects, like window handles or decor objects.
Tips for Precise Measurements
Use a Metal Measuring Tape
A metal tape measure is better than a cloth or plastic tape for accurate measurements, particularly when taking width and height measurements.
Recheck All the Measurements
To be on a safer side, always measure twice. With minor errors, you might end up with ill-fitting blinds.
Mind the Fixtures
Measure the area surrounding any window knobs or other fixtures to make sure the blind covers properly.
Check the Material and Function
The precise measurements may change depending on the kind of roller blind function and material. Certain mechanisms require extra space in order to be mounted.
Even Out the Mounting
Use a level on outside mounts to make sure the blind hangs well. This helps in creating a neat appearance.
Get Professional Help
Although taking measurements is doable on your own. But it is better to trust the expertise of a professional in this field. Brighter Blinds And Doors have many years of experience in window treatments. We have an extensive team of experts that take care of measurements, installation and maintenance. That too, in minimum turnaround time.
Conclusion
Although measuring for roller blinds may seem difficult, you can guarantee a great fit for your windows. This is possible by paying close attention to detail and using the right techniques. Precise measurements are crucial whether you go with an outside or inside mount.
